Summary

Complete wellness setup with a six-person sauna and an acrylic plunge tub. The plunge holds 32°F to 107°F with dual filtration and ozone. The sauna reaches 194°F with an 8 kW Harvia heater. Both feature WiFi control, LED lighting, and durable builds for indoor or outdoor spaces.

Overview

You pair steady cold or warm immersion with a full-size dry sauna. The acrylic plunge uses an insulated shell, a 1 HP heat-and-cool chiller, dual filtration, and ozone to keep water clear and ready. You set temperature through the WiFi app. The sauna uses Hemlock wood, LED lighting, Bluetooth audio, and a Harvia 8 kW heater that heats fast to 194°F. Both units support simple daily use when placed on level, load-rated surfaces with proper electrical setup.

Installation Notes

1. Use dedicated GFCI-protected circuits for each unit
   
2. Install the plunge on 120 V
   
3. Install the sauna on 240 V by a licensed electrician
   
4. Place both on level, load-rated surfaces with airflow
   
5. Maintain clearance from walls and combustibles
   
6. Follow local electrical and ventilation rules

Care and Maintenance

• Test and balance plunge water weekly
  
• Replace filters and check ozone system on schedule
  
• Keep the plunge covered when not in use
  
• Wipe sauna benches and walls after each session
  
• Re-oil sauna wood as needed
  
• Inspect fittings, seals, and heater stones on a set schedule
  
• Let both units dry fully after use

Safety Information

Cold Plunge Safety

• For wellness use only
  
• Consult a doctor if you have heart, circulation, or respiratory conditions
  
• Avoid use if pregnant, diabetic, or recovering from surgery
  
• Never use alone or under the influence of alcohol or drugs
  
• Start with warmer settings and short sessions
  
• Exit at once if you feel dizzy, numb, or short of breath

Sauna Safety

• For wellness use only
  
• Consult a doctor if pregnant or with heart or blood-pressure concerns
  
• Limit sessions to 10–20 minutes and stay hydrated
  
• Avoid extended exposure above 104°F
  
• Never use alone or after alcohol
  
• Exit at once if you feel lightheaded or overheated

Specifications

Acrylic Plunge

• Capacity: about 140 gallons
  
• Temperature Range: 32°F to 107°F
  
• Heating/Cooling: 1 HP chiller with heat/cool
  
• Shell: fiberglass-reinforced acrylic
  
• Filtration: dual-stage with ozone
  
• Lighting: color-changing LED
  
• Control: WiFi app
  
• Power: 120 V dedicated GFCI circuit
  
• Pump: continuous circulation
  
• Drain Valve: included
  
• Placement: indoor or outdoor on level base
  
• Insulation: insulated shell and cover

Sauna

• Seating Capacity: 6 persons
  
• Heater: Harvia 8 kW
  
• Maximum Temperature: 194°F
  
• Material: Hemlock wood with natural oil finish
  
• Lighting: adjustable LED
  
• Audio: Bluetooth speakers
  
• Control: WiFi system
  
• Heating Time: about 15 minutes to 194°F
  
• Installation: outdoor-ready with pre-assembled panels and roof
  
• Power: 240 V dedicated circuit (licensed electrician required)

Key Features & Benefits

Features

• Full hot and cold setup
  
• Harvia 8 kW heater and 1 HP chiller
  
• WiFi control for temperature and lighting
  
• Ozone filtration for clear water
  
• Pre-assembled sauna panels
  
• Insulated plunge with LED lighting
  
• Bluetooth audio

Benefits

• Support heat and cold immersion in one system
  
• Operate both units with simple app-based control
  
• Use indoors or outdoors with proper setup
  
• Keep water clear with built-in sanitation
  
• Enjoy a ready-to-use sauna with fast heating

Disclaimer

For recreational wellness use only. Not medical equipment. Consult a professional before use if pregnant or with health concerns. Follow all electrical and installation rules.