MuxLab 500800 KVM HDMI Over IP PoE Extender 4K60 for Networked AV Systems

The MuxLab KVM HDMI over IP PoE Extender 4K60 allows HDMI and USB equipment to be connected up to 330ft (100m) over an Ethernet LAN. It supports HDMI up to 4K at 60Hz (4:4:4) over Cat5e or better cabling for point-to-point and point-to-multipoint configurations. This solution supports video wall creation of user configurable size (X by Y) depending on network bandwidth.

The transmitter terminates to a computer server or workstation via HDMI and USB, while the receiver terminates to an HDMI display and USB devices such as keyboard and mouse. A single receiver can be switched via hotkey sequences to any transmitter on the network. This enables a single operator to manage numerous servers or workstations in a distributed KVM application.

This extender is ideal for multi-server management in corporate, educational, and data center environments. It supports USB 2.0 devices, directional IR for remote control, and PoE powered operation. Centralized management is supported through compatible network controllers.

Key Features

• 4K60 Video Support: Supports HDMI up to 4K at 60Hz (4:4:4).
• Extended Distance: Up to 330ft (100m) over Cat5e or Cat6 cable.
• KVM Functionality: Supports keyboard, mouse, and USB devices.
• PoE Powered: Supports PoE when used with a PoE Ethernet switch.
• Flexible Configurations: Supports point-to-point and point-to-multipoint applications.
• Directional IR Support: Enables remote control of end devices.

Technical Specifications

Environment
HDMI 2.0

Devices
Computers and servers with HDMI monitor ports.

Transmission
Transparent to the user

Bandwidth (HDMI)
597MHz

Signals
HDMI 2.0 protocol, HDCP 1.4, HDCP 2.2

HDR Color
HDR10 and Dolby Vision

Connectors
(1) HDMI receptacle.
(1) RJ45s for Cat5e unshielded or shielded twisted pair.
(2) 3.5mm jacks for audio-in and audio-out.
(1) 3.5mm jack for directional Infrared port.
(1) USB Type B connector for Host device.
(1) 2.1mm power connector.

Maximum Distance
Cat5e: 330ft (100m) from Ethernet Switch. Unlimited over the Internet

Latency
Typical one (1) Frame (16ms), maximum 2 frames (33ms)

Compression
JPEG 2000

Network Bandwidth
Up to 850 Mbps

Network Requirement
1000BaseT

RJ45 Pin Configuration
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Reverse Polarity Sensitive. Use EIA/TIA 568A or 568B straight-through wiring.

Cable
One (1) Cat 5e/6 or better twisted pair cables required

Power Source
This device supports PoE (PD), an external power supply is not included. It is intended to be powered via PoE (PSE) Ethernet Switch. If required, an optional power supply may be purchased separately.

PoE Standard
IEEE 802.3af

Power Consumption
6 Watt

Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95 percent non-condensing

Dimensions (W, D, H)
Standard TX and RX: 160mm x 140mm x 25mm
Wall-Plate TX: 110mm x 150mm x 15mm

Weight
0.63lbs (0.36kg)

Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0

Warranty
2 years

What's in the Box
500800-TX Transmitter, 500800-RX Receiver, or 500800-TX-WP-WH Transmitter Wall-Plate White (depending on selected variant)