Polishing antifouling with effective protection against organisms such as algae.
CRUISER 200 is a polishing antifouling especially for aluminium boats for use in both salt and fresh water.
The polishing property prevents the build-up of thicker layers and provides fouling protection for one season.
Suitable for all boat building materials, including primed aluminium. Yield: 10 m²/l.
Number of coats: Two per season.
Processing instructions
Technical data
Processing temperature: +5° C to +35° C
Drying time at 15 °C: 45 minutes (dust dry)
Overcoating time at 15 °C: min. 10 hours
Can be applied to most antifoulings provided they are in good condition. Not to be used in combination with VC17m or PTFE-containing antifoulings.

For coated surfaces

In good condition: Remove fouling, impurities and paint residues completely. High pressure clean the surface and/or remove loose parts and finally wet sand with 80-120 grit sandpaper (do not dry sand!). If existing antifouling is not compatible or unknown, seal with suitable barrier coat.
In poor condition: Use Interstrip to remove all antifouling residues.
GRP/Blank gelcoat: Make sure the surface is clean, dry, dust-free and in a generally good condition. Use Thinner No. 3 for degreasing. Coat the surface to be treated with Gelschield 200 (osmosis protection) or Primocon. Then apply two coats of CRUISER 200. Renew every season.

Wood: Make sure that the surface is clean, dry as well and dust-free and in generally good condition. Use Thinner No. 3 for degreasing. Prime with Interprotect or Primocon. Then apply two coats of CRUISER 200. Renew every season.

Steel/Aluminium/Lead: Make sure the surface is clean, dry, dust-free and in generally good condition. Use Thinner No. 3 for degreasing.